Cruiser 322 AC/DC Synergic

Cruiser 322 AC/DC Synergic is a professional synergic 3 Phase Inverter Power Source with separated wire feeder for MIG-MAG welding. MMA, TIG AC/DC HF processes are also available.
A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires.

 

Download the Catalogue CRUISER-322_402_502ACDC-Syn-ENG.pdf

 

Download the Manual

Cruiser 322AC-402AC-502ACDC-PP (EN).pdf WECO WF-103 (EN).pdf WECO WF-105 (EN).pdf WECO CU-09 (EN).pdf CE Cruiser 322AC/DC CE WF-103 CE WF-105 CE CU-09

 

Handleiding

Cruiser 322AC-402AC-502ACDC-PP (NL).pdf

WECO WF-105 (NL).pdf WECO CU-09 (NL).pdf CE Cruiser 322AC/DC CE WF-103 CE WF-105 CE CU-09
Category:
  3x400Vac ± 15% @ 50-60 Hz
 25A
 MIG-MAG TIG MMA
 40% 60% 100% 45% 60% 100% 45% 60% 100%
 320A 270A 240A 320A 280A 240A 300A 270A 240A
 20A – 320A 5A – 320A 10A – 300A
 11V – 72V
 15.2KVA – 12.0KW
 23S
 1160 x 670 x 1530 mm
 147.6Kg

 

Plus strutturali

Reduction Device Volt Controllo Arc ibrida

 

Funzioni Speciali

Special Functions

Fonctions Spéciales

Funciones Especiales

Sonderfunktionen

2500khzsynq-startdinamico-arcq-spotmultitackUlteriori fusionemix-ACDC

 

Omologazione

WECO-en-1090

Cruiser 322 AC/DC Synergic is a professional synergic 3 Phase Inverter Power Source with separated wire feeder for MIG-MAG welding. MMA, TIG AC/DC HF processes are also available.
A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires.
Cruiser 322 AC/DC Synergic power source can be easily moved on difficult working areas thanks to robust designed M-trolley.
MMA and MIG-MAG processes are directly selectable on the wire feeder. Microprocessor, inverter technology, digital displays, synergic curves and memory locations for customized welding parameters assure complete welding process repeatability.
Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with excellent weld bead quality and minimal spattering in any working conditions.
Weco Special HF control provides100% rapid and precise arc ignition.
The AC welding is here optimized thanks to:
the synergic arch ignition can be adjusted from the front panel by the calibration of the tungsten electrode’s diameter.
The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it
possible to create a highly penetrative and precise fusion bath, so that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding.
The MIX AC-DC wave allows to combine the efficacy of AC TIG welding with the high penetration of DC TIG welding, thus obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding.
The PULSE AC/DC welding is besides useful when welding for long time, in order to reduce the deformation on the base material.
The DC welding is here optimized thanks to:
TIG PULS up to 2,5 Khz and TIG PULS SYN (Synergic)
– The Dynamic Arc (DYNarc) function which ensures an enhanced welding penetration, a better stability of the arc,
avoiding any gluing between electrode and base metal; it allows to adjust the welding arc, just through slight torch’s movements, at any welding conditions.
– The Q-Start function, makes the sheet tacking easier and minimize the time for it at the beginning of the welding process.
– The Multi-Tack function, allows to minimize the heat output during the welding process and reduces the base material’s oxidation. This function permits often to avoid the post welding acid-treatments.
– The Q-Spot function, permits to carry out very easily and precisely the sheet tacking operation, with minimum heat output and sheet deformation. It allows the positioning of the electrode on the exact tacking spot.